Feature

The spring of the lamp is made of spring steel wire, and the surface is treated with hot electroplating nickel, or stainless steel. Refined and meticulous springs once again interpret high-quality fine craftsmanship. High-quality raw materials, good materials can make good products. Excellent craftsmanship, quality assurance, the durability of the spring comes from the excellent craftsmanship. The meticulous production of each link creates high spring toughness.

Application

Lamp springs are widely used in LED downlights, ceiling lights, lighting accessories, ceiling aisle panel lights, etc.

(6) The scroll coil spring has a similar function to the conical coil spring. It absorbs a large amount of energy under pressure. Due to the difficulty of manufacturing, it is only used in special situations limited by space. The flat scroll spring has a large number of turns, a large deformation, and can store a large amount of energy. It is mostly used for compression springs and energy storage components in instruments.
(7) The leaf spring can be made of a single spring steel plate or multiple sheets, with good cushioning and damping performance, especially the strong damping performance of multi-leaf springs, which are mainly used for suspension devices of automobiles, tractors and railway vehicles.
(8) Unequal pitch coil springs are mainly used for suspension springs of motorcycles and small passenger cars and high-speed engine valve springs. On the same spring, it can not only meet the requirements of small stiffness when the deformation is small, but also meet the requirements of high stiffness when the deformation is large. The unequal-pitch spring can meet these special requirements.
(9) The torsion bar spring is actually a straight bar made of elastic material that is subjected to torque. It has a large deformation energy per unit volume and is mainly used for suspension devices of various vehicles.
(10) The ring spring is made up of an outer ring with an inner cone and an inner ring with an outer cone. The logarithm of the inner and outer rings is determined according to the size of the load and the requirements of deformation. Ring springs have high damping capacity and are mainly used for heavy equipment and buffer devices.

(11) Wire springs are various wire springs made of spring wire, generally made of cold drawn spring steel wire. Wire springs are mostly used where the load is small and the load characteristics are not strictly required. The cross section of the wire spring is often circular, so its load has no direction limit, and it has the same bending stiffness in all directions.
(12) There are two types of spring clamps: round cross-section materials and rectangular cross-section materials. Sometimes, for ease of assembly, the clamp ring is made into an end and then bent a section. When manufacturing the clamp ring, the tightly wound spring ring can be flattened by itself after being cut off, and it must have a relatively large initial stress during winding.
(13) The serpentine spring is named after its twisty shape like a snake. According to its shape, it is also called “Z” shape and “S” shape spring. It is widely used in car seat cushions, so it is also called a seat spring.
(14) Multi-strand spiral springs generally first twist 0.5mm~3mm steel wires into steel cables, and then coil them into springs. The most commonly used are 3~4 strands of steel cables without center strands. When the wire rope exceeds 4 strands, there should be a center strand. In order to prevent the wire rope from loosening after being stressed, the wire rope rotation direction should be opposite to that of the spring.
(15) Clamp springs are often used for fastening automobile liquid storage tanks, etc., and belong to the category of double torsion springs. This kind of spring can be rolled by a numerical control spring coiling machine in enterprises with conditions. Generally, enterprises can roll it by hand, and some special auxiliary tools can be made when rolling. First cut and straighten the disk material, then make it into a “U” shape, and roll it into a curved shape on a special auxiliary device. The auxiliary device can be used with the spring coiling machine fed by the sector gear, and the reciprocating mechanism of the spring coiling machine is used. The auxiliary device “b” is installed in the position of the feeding guide wheel to realize the semi-automatic production of the bending of the clamp spring, which can increase the production efficiency by about 10 times compared with manual operation.

Feature

The torsion spring is a spring that bears torsion deformation, and its working part is also tightly wound into a spiral shape. The end structure of the torsion spring is a torsion arm machined into various shapes, not a hook ring. The torsion spring uses the principle of lever to twist or rotate the soft and tough elastic material, so that it has great mechanical energy.

Application

Compression spring wire springs are used in everything from home appliances to motorized equipment, motors, etc., because it is the required type of spring. By the load acting on them or their ends are compressed, the compression spring is compressed by the design of the wire trying to return the spring to its original shape, so that the load is pushed back. Main application directions: medical breathing equipment, medical mobile equipment, hand tools, home care equipment, shock absorption, engine valve springs.